Backup Power Reviews
← Work out what you need

How to choose a solar panel for a portable power station

Start with about 300 Wh for an evening of broadband, 1 kWh for overnight fridge freezer backup, or 2 kWh if you need the fridge and broadband through a longer cut. Size the battery for a cut with little or no sun. A compatible panel can put some of that energy back in daylight.

Good, better and best winter backup setups

Choose the smallest setup that covers the outage you’re planning for. The runtimes below start with a full battery and allow for station losses. December solar is shown separately because it can arrive after the battery runs out.

As an Amazon Associate I earn from qualifying purchases.

Good for broadband and phone charging

Buy the 288 Wh Anker SOLIX C300X with mains sockets and the Anker PS60 60 W panel. Budget for about 6–9 hours of broadband at 18 W with the original mains adaptors. Allow a little less time if you also charge phones. For a fridge freezer, choose a larger battery and verify compressor start-up. Anker lists this exact pairing and rates the C300X solar input at up to 100 W. C300X and PS60 bundle options · PS60 specifications

Anker SOLIX C300X with mains sockets on Amazon UK (paid link) Station only

Want a third mains socket or an expandable battery in this size? EcoFlow lists the 286 Wh RIVER 3 Plus with a 110 W portable panel. EcoFlow 110 W bundle · Compare the two compact stations

Better for a fridge freezer through an overnight cut

Buy the 1,024 Wh Anker SOLIX C1000 Gen 2 with the Anker PS200 200 W Bifacial Portable Solar Panel. Budget for about 18–23 hours for the fridge freezer alone in our Beko example. Add eight hours of broadband during that first day and the same energy budget gives about 15–19 hours of fridge runtime. This is the tier we’d buy for an overnight cut if there’s space to unfold the 200 W panel. Anker UK C1000 Gen 2 and PS200 bundle · 1 kWh buying comparison

Anker SOLIX C1000 Gen 2 on Amazon UK (paid link) Station only

Larger setup for a fridge freezer and broadband through a longer cut

Consider the 2,048 Wh EcoFlow DELTA 3 Max Plus with one EcoFlow 400 W Lightweight Portable Solar Panel. Budget for about 36–46 hours for the fridge freezer alone, or 32–40 hours with eight hours of broadband per day. Check the exact Lightweight panel’s unfolded dimensions against your usable space, including clearance for safe positioning. A higher-capacity battery is the first upgrade if you need a third day and can’t count on placing a panel in the sun. Exact EcoFlow UK battery and 400 W Lightweight panel bundle · UK station specifications · Compare other 2 kWh stations

EcoFlow DELTA 3 Max Plus on Amazon UK (paid link) Station only

Read our DELTA 3 Max Plus buying review for the UK specifications, expansion trade-offs and who should choose a smaller battery.

How much does each panel put back in December?

Modelled output per December day before station charging losses
Rated panelLondonGlasgow
60 W80 Wh40 Wh
200 W260 Wh140 Wh
400 W520 Wh280 Wh

The 400 W panel’s December average in either city falls short of the Beko’s 670 Wh per day even before the station’s overhead. On a dull or shaded day it may add far less. Try the setup in the place you’ll actually use it. Keep the station within its specified charging temperature range, including overnight.

To put a top-up in context, if two hours of sun lift the 2,048 Wh station from 30% to 40% with the appliances off, that suggests roughly 205 Wh added if the percentage display tracks stored energy accurately. It is not a measured energy reading. After the same conversion and reserve allowance, it buys around four more hours for the example fridge. Time and charge gained will vary with the weather and where you put the panel.

What the runtime estimates assume

We start with 85% of rated capacity after conversion and reserve, then allow 10–20 W for the station whenever its mains outlets are on. That range shows how much idle draw can change the answer. In one UK test, The Technology Man estimated about 17 W at idle with the C1000 Gen 2 mains sockets on. The other stations and settings can differ. Published C1000 Gen 2 test

The Beko CFG4582W uses 670 Wh per day on its energy label. Broadband adds 144 Wh for eight hours. The combined 2 kWh example averages that broadband use across each day. Check that your fridge starts and that the sockets stay on between compressor cycles. Fridge freezer runtime calculator and UK metered examples · Broadband runtime examples

What can a 100 W panel add in a British winter?

In the PVGIS model below, a 100 W panel in December averages about 130 Wh a day in London and 70 Wh in Glasgow. An 18 W broadband setup uses 144 Wh in eight hours, before the station’s own losses. A shaded spot or an overcast day can leave you well short. Broadband backup runtime examples

Modelled daily output of one 100 W panel, rounded to the nearest 10 Wh
MonthLondonGlasgow
November170 Wh120 Wh
December130 Wh70 Wh
June390 Wh350 Wh

We reran the European Commission’s PVGIS 5.3 model on 16 November 2026 for London (51.5074, −0.1278) and Glasgow (55.8642, −4.2518), with 0.1 kWp rated power with the 2005–2023 SARAH3 dataset, a freestanding crystalline silicon panel facing south at 45°, 14% system losses and the modelled terrain horizon. The model excludes local shade from railings or buildings and the station’s particular charging behaviour. A particular outage day can yield much less than the long-term average. PVGIS method · Download our inputs and monthly results (JSON)

100 W, 200 W or 400 W: choose the panel you can use

A compact panel is easier to carry and place; a 400 W folding panel needs considerably more clear space. Compare fully opened dimensions, weight, cable length and a stable permitted position, not just the carry case. A small panel in clear daylight can be more useful than a large one left folded indoors.

The December figures scale with rated panel power in this model: 200 W gives twice the 100 W estimate, and 400 W four times it. This is a modelling relationship, not a guarantee that different panel products perform proportionately in your garden. Check shading and the station’s input limits. If resilience is the priority and funds are limited, extra charged storage may cover a winter outage more dependably than a panel you cannot place well.

Check the station’s input before comparing panel watts

  1. Voltage: Match the panel’s operating voltage to the station’s input range. Check that its open-circuit voltage, including the rise in cold weather, stays below the station’s maximum. A manufacturer-approved pairing is the simplest way to check.
  2. Current, watts and cable: Check the station’s manual for limits and the connector or adaptor it requires. Check that the exact bundle includes the cable. A panel’s nameplate wattage alone cannot establish compatibility.
  3. Actual charging rate: If the display shows 20 W coming in, sending 200 Wh to the station takes 10 hours at that rate. At a steady 50 W it takes four hours. The battery stores less after its own losses, and the rate moves as the sun and shade change.

If you came here looking for approved plug-in panels, see how balcony solar behaves in a power cut.

Does a 200 W panel provide 200 W all winter?

No. The rating is a test-condition output, not a daily energy allowance. The worked winter examples below use location and seasonal assumptions; shade, orientation and weather can reduce the result further.

Should I buy more panel or more battery first?

Cover the essential no-sun period with stored energy first. Then choose a compatible panel that fits the space available. More panel can help refill the battery, but it cannot guarantee useful sunshine during an outage.

Updated