How long will a power station run a fridge freezer?
For the Beko CFG4582W, a 1 kWh power station gives about 22 hours and a 2 kWh station about 45 hours in our worked example. The station must be able to start the compressor and have enough energy to keep the fridge freezer running.
If the power is already off, keep the doors closed. The Food Standards Agency estimates that a closed fridge can stay cold for up to four hours. A full freezer may keep food frozen for up to 48 hours, or around 24 hours if half full. Temperatures vary, so follow the guidance to decide what food to keep. Food Standards Agency · Food Standards Scotland
How much electricity does a fridge freezer use?
The 270-litre Beko CFG4582W is our worked example. Its E-rated energy label gives 245 kWh per year. Divide that by 365 to get 0.67 kWh per day, equivalent to an average of 28 W over 24 hours. The compressor switches on and off, so check its start-up requirements separately. John Lewis listing · Beko energy label
Estimate your fridge freezer’s runtime
How much fridge freezer runtime do you get per kWh?
Find the kWh per year figure on your energy label and use the closest row. The figures assume one already-cold fridge freezer, 85% of the station’s rated battery capacity after conversion and reserve, and 10 W to keep its mains sockets on. That 10 W alone adds 0.24 kWh per day.
| Energy label | Use per day | Hours per kWh |
|---|---|---|
| 150 kWh/year | 0.41 kWh | 31 hours |
| 200 kWh/year | 0.55 kWh | 26 hours |
| 245 kWh/year (Beko) | 0.67 kWh | 22 hours |
| 300 kWh/year | 0.82 kWh | 19 hours |
| 400 kWh/year | 1.10 kWh | 15 hours |
Multiply the hours by your station’s rated capacity in kWh, or use the calculator with your exact figures. For the Beko, three days would take roughly 3.2 kWh of rated capacity before allowing any extra margin. A warmer kitchen, a second appliance or a station with higher idle draw will shorten the runtime.
Once you know how much capacity you need, see our fridge freezer buying picks, 1 kWh comparison or 2 kWh comparison.
Choose a station for the runtime you need
For an overnight cut, shortlist the Anker C1000 Gen 2. The 1 kWh class suits a modest fridge energy budget when the cut is expected to end before a second day. Use the calculator with your own demand and allow for station overhead. Compare the two 1 kWh picks
As an Amazon Associate I earn from qualifying purchases.
Anker SOLIX C1000 Gen 2 on Amazon UK (paid link)
For a longer cut, compare the Anker C2000 Gen 2 and BLUETTI Elite 200 V2. The Anker offers expansion, while the BLUETTI has a higher continuous output. Choose based on your energy budget and the exact UK offer. See the 2 kWh comparison
Anker SOLIX C2000 Gen 2 on Amazon UK (paid link)
BLUETTI Elite 200 V2 on Amazon UK (paid link)
What UK households actually measured
National Energy Action monitored fridges and freezers with plug-in meters. Its older Beko K54299H/B725U used 0.53–0.59 kWh a day during normal use and averaged 0.41 kWh a day while the resident was on holiday. On one normal day it used 0.56 kWh, even though it drew 87–90 W while the compressor was running. That is a different Beko from our worked example. National Energy Action field measurements (PDF)
The same study measured a Siemens KG39NEWEAG at 0.776 kWh over one day. Its 238 kWh/year label works out to 0.65 kWh/day. With the assumptions above, a 2 kWh station would give roughly 40 hours using the measured day, or 46 hours using the label. One day is a sense check on the estimate. It cannot establish how often that fridge uses more or less than its label suggests. Siemens specification (PDF)
Can you work it out from the A–G rating?
Use the kWh per year figure printed on the label. The letter compares efficiency against a benchmark that accounts for the appliance’s size and compartments. The Beko in our example is rated E at 245 kWh a year. The larger Beko ASL1442V is also rated E but uses about 327 kWh a year. That brings the 2 kWh runtime estimate down to 36 hours. A+ belongs to an older scale. If you only know the letter, look up your exact model or measure its energy use. UK energy label guidance
Check your own setup
- Use a plug-in energy meter suitable for the appliance. Leave the fridge freezer running normally for at least 24 hours, preferably 48, and record total kWh and elapsed hours.
- Divide total kWh by hours and multiply by 24 to get the daily figure. Repeat over another day if room temperature, door openings or defrost cycles changed.
- Check compressor start-up and low-load shut-off separately. A plug-in meter can miss short starting peaks, and some batteries cut their sockets off when the compressor stops. Test your exact setup before relying on it.
Aquariums also mix cycling and continuous loads, but food-storage assumptions do not transfer to livestock. Use the aquarium filter and heater budget for that separate job.
Correction, 16 November 2026: Removed an unsupported popularity description of the Beko example. Its energy-label figures and the independently measured household examples remain separate.