Backup Power Reviews

BLUETTI Elite 100 V2 vs Anker SOLIX C1000 Gen 2

The Anker is our pick at a similar price. The BLUETTI is worth a look if it costs less or you need its higher rated solar input.

As an Amazon Associate I earn from qualifying purchases.

Compare specifications and tests ↓

How the two models compare

Both carry the same rated battery capacity. The Anker can supply 200 W more at once on paper. Four UK mains sockets and the 47-minute recharge recorded in a UK review make the Anker the more convenient choice for most households. Buy the BLUETTI if the price difference outweighs those benefits for you.

Manufacturer specifications · checked 16 November 2026
MeasureBLUETTI Elite 100 V2Anker SOLIX C1000 Gen 2
Rated battery capacity1,024 Wh1,024 Wh
Continuous AC output1,800 W2,000 W
UK mains sockets24
Maximum rated solar input1,000 W600 W
Weight11.5 kg11.3 kg
Fastest claimed mains rechargeAbout 70 minutes, TurboBoost49 minutes, UltraFast mode
Claimed backup switchover10 ms10 ms
Published test results and gaps
MeasureBLUETTI Elite 100 V2Anker SOLIX C1000 Gen 2
Reported US AC energy; source has inconsistent Anker specifications890 Wh890 Wh
Separate discharge test936 Wh at 200 W (EU)907 Wh at 1,000 W (UK)
Separate mains recharge testAbout 99 minutes (US)47 minutes, UltraFast (UK)
Runtime on the same UK broadband setupNo matched test foundNo matched test found

Desk-based review drawing on published tests and UK specifications. The separate discharge and recharge figures come from different loads, settings and regional variants. OutdoorGearLab reports 890 Wh for each, but its Anker table lists 1,800 W and six sockets while the prose describes 2,000 W and five. The UK Gen 2 has four sockets. That internal inconsistency prevents us treating the pair as a verified like-for-like result. We have no matched UK efficiency winner. OutdoorGearLab · Smartzone · The Solar Lab · The Technology Man

What the separate tests found

BLUETTI Elite 100 V2

Buy the BLUETTI if it costs meaningfully less than the Anker or you need its higher rated solar input. The UK BLUETTI has two mains sockets. Check the spacing if you need both for bulky adaptors.

  • Usable energy. OutdoorGearLab reports 890 Wh, but its comparison contains inconsistent Anker specifications; we do not use that pair to establish an efficiency tie. Smartzone measured 936 Wh at 200 W and 903 Wh at 1,800 W on a 230 V European unit. These results describe different loads and test units. OutdoorGearLab · Smartzone
  • Recharge. The Solar Lab recorded about 99 minutes on a 120 V unit and observed slower charging below 20%. Treat the UK maker’s 70-minute figure as a fast-mode claim. The Solar Lab
  • UK sockets. The UK unit has two mains sockets. Check whether your adaptors fit side by side. TechRadar’s UK review

BLUETTI UK product specifications · BLUETTI Elite 100 V2 European manual

Anker SOLIX C1000 Gen 2

Our pick at a similar price for home backup. Four UK mains sockets give you room for a router, fibre connection box and other devices. A UK reviewer measured a full recharge in 47 minutes with UltraFast charging enabled. Check the automatic AC shut-off setting if you mainly power small loads.

  • Usable energy. OutdoorGearLab reports 890 Wh, but its comparison contains inconsistent Anker specifications; we do not use that pair to establish an efficiency tie. The Technology Man measured 907 Wh at a 1,000 W load on a UK unit. OutdoorGearLab · The Technology Man
  • Recharge and switchover. The Technology Man recorded a full recharge in 47 minutes in UltraFast mode, audible fans during fast charging and successful switchover with the reviewer’s desktop PC. The Technology Man
  • Small loads. The reviewer reported that the default Smart AC Output Mode could turn the mains sockets off after 15 minutes below 20 W. With the setting disabled, the reviewer estimated about 17 W of idle draw on that unit. Check how the setting behaves on your firmware and test with your devices. The Technology Man

Anker SOLIX UK product specifications · Anker UK support and A1763 manuals · Anker SOLIX UK warranty terms

Check the exact model

BLUETTI Elite 100 V2

Look for the Elite 100 V2 UK base unit. Check whether the selected offer includes panels or chargers before comparing its price.

If a Jackery offer is on your shortlist, check the Explorer 1000 v2 and 2027 naming differences before comparing the price. For a smaller base unit with added capacity, the RIVER 3 Max Plus versus C1000 Gen 2 comparison separates storage from output.

Does the same Wh rating mean the same runtime?

No. The inverter, load and standby consumption affect how much energy reaches the appliance. Read the test conditions alongside each result; do not turn a high-load measurement into a broadband-runtime promise.

What should settle a close buying decision?

At a similar price, our Anker recommendation rests on the UK features and separately identified evidence below. If the BLUETTI costs less or its higher rated solar input matters to your setup, it can be the better fit. Check the exact UK unit and seller before ordering.

Correction, 16 November 2026: Removed an apparent efficiency tie after finding inconsistent Anker generations in a cited comparison. Published results are now shown with that limitation; the recommendation rests on UK specifications and the separate UK test.

Anker SOLIX C1000 Gen 2

Choose Gen 2, UK model A1763. Check the selected offer includes the mains charging lead; the original C1000 and solar bundles are different purchases.

What would you keep running?

Start with the devices you rely on. See how to work out how much energy a Wi-Fi router and full-fibre connection box would use during an eight-hour power cut.

See the broadband example →

See picks for other use cases →

Updated