What size battery do you need?
Add the equipment you want to keep running and the number of hours you need. This planner estimates the minimum rated battery capacity, then offers up to two candidates to investigate. You still need to check peak power and equipment compatibility.
Candidates to investigate
Desk-based shortlist, using manufacturer-rated capacity and continuous output. A capacity match is not a compatibility guarantee: check start-up demand, sockets and automatic shut-off against your equipment before buying.
As an Amazon Associate I earn from qualifying purchases.
EcoFlow RIVER 3 Plus
286 Wh rated · 600 W continuous output
Small mains loads, with an option to expand later. 572 or 858 Wh with EB300 or EB600.
Anker SOLIX C1000 Gen 2
1,024 Wh rated · 2,000 W continuous output
A practical 1 kWh shortlist option with four UK sockets. Fixed capacity.
BLUETTI Elite 100 V2
1,024 Wh rated · 1,800 W continuous output
A 1 kWh alternative when its price or solar input suits better. Fixed capacity.
Anker SOLIX C2000 Gen 2
2,048 Wh rated · 2,400 W continuous output
Larger energy budgets, lower carrying weight and later expansion. 4,096 Wh with the compatible BP2000 Gen 2.
BLUETTI Elite 200 V2
2,073.6 Wh rated · 2,600 W continuous output
A fixed-capacity 2 kWh alternative when the delivered price is attractive. Fixed capacity.
How the calculation works
The default example uses 18 W of broadband, 35 W for a computer, and 15 W to keep the station’s mains sockets on. Eight hours uses 544 Wh including that overhead. At 85% usable capacity, the estimate is 640 Wh of rated battery. A 1 kWh station leaves some additional room for variation.
To calculate by hand, add average appliance watts and station overhead, multiply by hours, then divide by the usable fraction. Convert a fridge’s daily kWh to average watts by multiplying by 1,000 and dividing by 24. Fridge freezer energy labels and measured examples · Home office worked example
Check peak demand separately
A daily fridge average cannot tell you whether the station can start the compressor. A laptop average can be below the demand while it charges its own battery. Check the combined maximum draw of devices that may run together and the station’s continuous output. Leave room for start-up requirements and test the actual equipment.
The 85% figure and 15 W overhead are planning assumptions. Replace them with evidence for your station and load where possible. Solar and intermediate recharges are excluded from this first capacity calculation so you can plan the period you need to cover from stored energy.
Choose a buying guide
- Compact stations for small loads
- 1 kWh stations for a working day or overnight backup
- 2 kWh stations and expansion
For a short outage you may already own enough equipment. Start with a charged laptop and phone power bank, then size a station for the loads those cannot cover. See all buying and use-case guides