Backup Power Reviews
← Compare 2 kWh power stations

Anker SOLIX C2000 Gen 2 UK review

Desk-based buying analysis, using the sources identified below. We have not personally tested these products.

The C2000 Gen 2 is worth shortlisting if you want a relatively manageable 2 kWh station with an expansion option. Its strongest practical reasons to buy are the 18.9 kg weight and compatible extra battery. Published testing gives us reason to be cautious about assuming all 2,048 Wh will reach your appliances.

As an Amazon Associate I earn from qualifying purchases.

Anker SOLIX C2000 Gen 2 on Amazon UK (paid link)

What the published test found

Notebookcheck tested a European C2000 Gen 2 and reported just over 1,600 Wh delivered at a continuous load of roughly 200 W, approximately 78% of rated capacity. The reviewer liked its reduced weight and quiet operation, while identifying AC efficiency as a drawback. Those measurements belong to that regional unit and test setup. They give a useful check on the headline capacity, without establishing runtime for a UK fridge. Notebookcheck hands-on test

A 200 W load uses 1,600 Wh over eight hours. That shows why sizing solely from the 2,048 Wh label can leave a buyer short. A fridge cycles, and the station keeps using some energy while the compressor is stopped. Use the fridge runtime calculator with a sensible overhead allowance, then test your actual setup. Avoid subtracting inverter losses again from an already measured AC output figure.

The same review reported about 1,850 Wh at 1,800 W. That higher-load result changes the interpretation: this is a load-dependent efficiency issue, rather than a single fixed usable-capacity figure. Compare the conditions in our evidence ledger.

What you get in the UK

Anker rates the UK station at 2,048 Wh, 2,400 W continuous output and 18.9 kg. Its compatible BP2000 Gen 2 takes total capacity to 4,096 Wh. The solar input is rated up to 800 W, within the voltage and current limits. Check the correct generation of expansion battery and connecting equipment when pricing a package. Anker UK specifications

Check the output of the appliance you actually want to run. A 3,000 W kettle is above the continuous rating. A fridge’s average draw is much lower, but starting the compressor and keeping the sockets enabled between cycles remain separate checks.

When we’d choose it

It makes sense for someone who expects to carry the station between home and a vehicle and may later need twice the stored energy. At 18.9 kg it is still a substantial lift. Measure the storage space and consider whether you can carry it safely before relying on the word portable.

Compare the full delivered price with the BLUETTI Elite 200 V2 if you expect to keep the station in one place and need no expansion. Consider the EcoFlow DELTA 3 Max Plus if its higher continuous output serves a real appliance requirement. Our 2 kWh comparison puts the principal differences together.

Before you order

Confirm delivery to your postcode and the actual dispatch date with the chosen retailer before ordering, especially if you need backup urgently. Delivery arrangements differ between sellers and can change.

Choose the UK C2000 Gen 2 base station or an explicitly described bundle. Check socket layout, mains lead, seller, delivery date and warranty support. A listing for an expansion battery alone will not give you a complete power station. If you mainly need one working day, compare the 1 kWh alternative before taking on the extra cost and weight.

Correction, 16 November 2026: Rounded the reported 1,600 Wh result consistently to approximately 78% of 2,048 Wh. Removed the dated delivery claim.

Updated