Specification guide · UK buying advice
DJI Power 1000 V2: UK specification guide
Desk-based specification analysis. We have not verified an independent test of this exact model for this guide. Manufacturer ratings and calculated examples are labelled separately.
Shortlist the Power 1000 V2 when its supported DJI charging accessories or expansion path solve a specific problem. For ordinary mains appliances, compare the complete accessory cost and carrying weight with the Anker C1000 Gen 2 before buying.
As an Amazon Associate I earn from qualifying purchases.
Check DJI Power 1000 V2 on Amazon UK (paid link)
What the UK model actually offers
The V2 stores 1,024 Wh and weighs approximately 14.2 kg. The UK version has two mains sockets; photographs of overseas units can show four. Each of its two USB-C ports supports up to 140 W with compatible PD 3.1 equipment and an appropriate EPR cable. UK manufacturer specifications
DJI advertises 2,600 W continuous output under its stated 25°C laboratory conditions. That is output capability, not a larger battery: a high-powered appliance can still empty a 1 kWh station quickly. A 3 kW kettle exceeds that rating. Check the exact appliance and everything running alongside it. DJI’s output conditions and accessory guide
Do you need the DJI connections?
The SDC connections support dedicated accessories, including cables for specified DJI flight batteries. Do not assume a cable works with every drone from the same brand. A Mini-series charging hub using ordinary USB-C has a different buying case from an explicitly supported fast-charge combination.
Write down the job for each connection before ordering: charge flight batteries, supply a 12 V fridge, accept solar, or connect an expansion battery. The full-size SDC and SDC Lite ports are not interchangeable for every accessory. DJI specifies that SDC Lite cannot connect an expansion battery. Price the supported cables and charging modules as part of the system. Check DJI’s accessory compatibility
What independent testing tells us
OutdoorGearLab reports 880 Wh delivered from its US Power 1000 V2. That is about 86% of the rated 1,024 Wh. However, the same source describes 2,200 W in its prose and 2,600 W in its table, mixing specifications associated with different generations. We cannot treat the 880 Wh entry as a verified exact-model result. It does not establish UK broadband or fridge runtime. Read OutdoorGearLab’s test
For illustration, 85% of rated energy is 870 Wh. A 150 W editing setup with an assumed 15 W station overhead would run for about 5.3 hours. At a 50 W laptop load plus the same overhead, the estimate becomes 13.4 hours. These are planning scenarios, not measured DJI runtimes. Direct USB-C operation needs its own loss allowance.
The reason to choose something simpler
If all your equipment uses ordinary mains plugs, the C1000 Gen 2 offers the same rated energy in a lighter unit with four UK sockets. DJI becomes more compelling when a particular supported accessory saves time or its expansion arrangement fits a known future requirement. Neither advantage should be assumed from a drone logo alone.
Before buying, distinguish Power 1000 V2 from the original Power 1000 and the Power 1000 Mini. The link above is the V2 base station, not a solar or car-charging bundle; at our check it opened a choice of buying options. Confirm the UK version and seller, and include the correct accessories in your total. Compare DJI with Anker or budget a day of camera and laptop work.
Correction, 16 November 2026: Reclassified this page as a specification guide because the outside review mixes output ratings from different generations. Its reported energy result does not establish performance for the exact UK model.