Is it worth charging a portable power station overnight?
At 8p per kWh overnight and 36p in the day, a station that delivers 80% of the electricity you put into it saves about 21p for each kWh bought overnight and used the next day. That can save money on a battery you already own. Buying one for the saving alone is a longer payback.
Work it out with your rates
Buy 1 kWh overnight for 8p. At 80% efficiency from wall socket to appliance, 0.8 kWh reaches the appliance. The same energy from your daytime supply costs 28.8p. The difference is 20.8p per cycle, or 26p for each kWh you actually deliver to the appliance.
| Energy delivered each time | Saving each time | 250 days of use |
|---|---|---|
| 0.4 kWh | 10.4p | £26 |
| 0.8 kWh | 20.8p | £52 |
| 1.6 kWh | 41.6p | £104 |
Divide your overnight unit rate by your expected efficiency to get your cost per kWh delivered. Subtract it from your daytime unit rate, then multiply by the kWh you’ll put to use. The 80% above is an assumption for the entire cycle. Leaving the station’s mains inverter on between uses can reduce your savings. If you’re changing tariff, compare standing charges and what the rest of your home will pay during peak hours too. Energy Saving Trust guide to time-of-use tariffs
At 0.8 kWh delivered per day, even 365 days gives about £76 a year. A £500 station would take about six and a half years to recover its price in that example, before battery wear or tariff changes. The saving also depends on actually using the energy each day.
What can you run on the cheaper electricity?
Start with one plug-in device you use during peak hours and check its watts and how much energy it uses over the session. A laptop or desk setup is easier to fit within a small battery’s limits than a whole tumble-dryer cycle. Some dryers can draw more than the station’s continuous output, and even a compatible dryer may use more energy than a 1 kWh battery can deliver. Worked appliance examples
If you own a battery and want to test the numbers, use a suitable plug-in energy meter. Start and finish the charge and discharge tests at the same displayed battery level across the whole cycle. Measure energy bought at the wall and energy delivered to the appliance over a typical session.
Look for a schedule and leave a backup reserve
If you’re buying for backup anyway, the Anker SOLIX C1000 Gen 2 is an example with a time-of-use mode. Anker documents its peak, mid-peak and off-peak scheduling modes. Check available charge and reserve controls in the current app. Check the exact UK model and decide what charge you want to keep for a cut before using the battery every day. Set the schedule using the cheap hours confirmed by your supplier. Anker time-of-use setup guide · Compare the C1000 Gen 2 with another 1 kWh station
As an Amazon Associate I earn from qualifying purchases.