Charging cordless tool batteries away from the mains
A power station can keep your existing tool charger working where there’s no convenient socket. The useful buying question is how many batteries you need to replenish and how quickly. A 1 kWh station is a plausible size for several full 18 V recharges over a day.
Turn amp-hours into a daily budget
Multiply nominal volts by amp-hours. An 18 V 4 Ah pack stores about 72 Wh. An 18 V 5 Ah pack stores about 90 Wh. The charger draws more energy than reaches the pack, and the station uses energy while its mains output is on. Use a plug-in meter through a normal full recharge to get a better figure for your own charger and battery.
| Station | 18 V 4 Ah packs | 18 V 5 Ah packs |
|---|---|---|
| 288 Wh | 2 full charges | 2 full charges |
| 1,024 Wh | 9 full charges | 7 full charges |
| 2,048 Wh | 19 full charges | 15 full charges |
We round down and use a 70% whole-chain assumption, including conversion, charging and overhead. These are energy budgets. Long idle periods, cold packs and different chargers can reduce the count. A half-empty pack takes less energy to replenish, so distinguish top-ups from full-charge equivalents.
Will the charger fit the station’s output?
Check the charger’s mains input rating. Its advertised charging current is on the battery side. For example, Bosch’s GAL 18V-40 supplies up to 4 A to compatible packs and lists about 65 minutes to fully charge a GBA 18V 4 Ah under its stated conditions. That describes charging speed. Use the UK charger’s rating plate to check the station’s socket load. Bosch UK charger specifications · Bosch charging instructions
Add the input requirements of chargers you’ll run together. Try them starting together while you supervise the setup. Use the original approved charger for each battery family and let a hot pack cool as the manufacturer directs. Keep the charger protected from dust and rain and follow the site’s arrangements for electrical equipment.
What we’d buy
For a couple of top-ups, consider the mains version of the Anker C300X. Its 300 W continuous output must cover the charger. It is an easier box to carry when your day’s energy budget fits.
As an Amazon Associate I earn from qualifying purchases.
Anker SOLIX C300X with mains sockets on Amazon UK (paid link)
For several full recharges, start with the C1000 Gen 2. Its four UK sockets make it easier to arrange several chargers, subject to the combined load. Compare its price with the other 1 kWh pick. If you regularly exhaust this much capacity, price extra tool batteries and a recharge plan alongside the larger station.
Anker SOLIX C1000 Gen 2 on Amazon UK (paid link)
Charging battery tools is a different load from starting a mains saw or compressor. Check motor start-up separately before adding those jobs to the plan. For vehicle top-ups between jobs, see how much a 12 V car socket can add.